Cleaning agent code:

JS-603

Cleaning agent category:

Water-based cleaning agent

Exterior:

Light yellow transparent liquid

Boiling point:

Above 100℃

Density (-20℃):

1.1+/-0.05

PH value:

Original solution: 12-13

Product performance

This product is suitable for back-end ultrasonic cleaning of sapphire glass. It is designed with a Chinese-alkaline medicine to prevent heavy oxides, offset printing, dirty powder, and white spots that are difficult to fall off, and to prevent blue and fogging during cleaning. Liquid, compatible with high-concentration lubricants and stripping agents as the main components, does not contain harmful ingredients, and is an environmentally friendly product.

This product has a good degreasing effect and is suitable for cleaning with the back-end screen printing. It does not damage the ink under a specific process and has very low scratches on the glass.

Instructions

Immersion for 3-5 minutes-ultrasonic cleaning-wind cutting-drying

Ultrasonic heating can be set to 45℃-65℃, and it can also be cleaned at room temperature. The higher the Hertz of the ultrasonic generator, the faster the cleaning effect and the better the degreasing effect.

Packaging, storage and transportation:

This product is a non-flammable liquid, and the packaging is 25KG per barrel, which can be transported by ordinary trucks.

Storage conditions:

Store in a ventilated warehouse in a cool place, within the range of 0-40℃